Epoxy Flooring Cost in Toronto (2026 Pricing Guide)

Thinking about epoxy flooring for your garage, basement, warehouse, or commercial space? You're in the right place. This guide breaks down everything you need to know about epoxy flooring costs in Toronto — from a single-car garage to a full-scale industrial facility — so you can make an informed decision before requesting a quote.

Why Do Epoxy Flooring Costs Vary?

Epoxy flooring isn't a one-size-fits-all solution, and neither is the pricing. The final cost of your project depends on several factors: the size and condition of your concrete floor, the type of coating system you choose, the level of surface preparation required, and the decorative finish you're after.

A standard garage epoxy job looks very different — in scope and cost — from a metallic epoxy showroom floor or a heavy-duty warehouse coating. Understanding what goes into the price helps you compare quotes accurately and avoid surprises.

Epoxy Flooring Cost in Toronto: 2026 Pricing Table

The prices below are estimated ranges for professionally installed epoxy flooring in Toronto and the Greater Toronto Area (GTA). All prices are in Canadian dollars (CAD) and reflect typical project costs including materials and labour.

Garage Epoxy Flooring

Garage Size	Approximate Square Footage	Estimated Cost (CAD)
Single Car Garage	200–250 sq ft	$800 – $1,500
Double Car Garage	400–500 sq ft	$1,500 – $3,000
Triple Car Garage	600–750 sq ft	$2,500 – $4,500

Residential Epoxy Flooring

Space	Approximate Square Footage	Estimated Cost (CAD)
Basement	500–1,500 sq ft	$2,000 – $6,500
Laundry Room	50–100 sq ft	$400 – $900

Commercial & Industrial Epoxy Flooring

Space Type	Estimated Cost (CAD)
Retail Store	$3,000 – $12,000+
Restaurant Kitchen	$2,500 – $8,000
Warehouse	$8,000 – $50,000+
Factory / Industrial Facility	$15,000 – $100,000+

Note: These are estimated ranges. Final pricing depends on floor condition, system type, square footage, and site-specific requirements. Contact Toroo Coatings for a free, accurate quote.

What Factors Affect Epoxy Flooring Costs?

Several variables influence the final price of your epoxy flooring project. Here's what to expect:

1. Surface Preparation

Proper surface preparation is the most critical step in any epoxy installation — and it's also one of the biggest cost drivers. Concrete must be mechanically ground or shot-blasted to open the pores and ensure a strong bond. Poor prep leads to peeling and early failure. Professional-grade prep is non-negotiable for a lasting result.

2. Crack Repairs

Existing cracks, spalls, or divots in your concrete must be filled and repaired before coating. Minor hairline cracks may add $100–$300 to the project, while more significant structural damage can increase costs further.

3. Moisture Issues

Concrete with high moisture vapour transmission (MVT) requires a moisture-mitigation primer before the coating system is applied. Skipping this step is the leading cause of epoxy delamination. If moisture is detected, expect additional material and labour costs.

4. Floor Size

Larger floors generally have a lower cost per square foot due to economies of scale. Small rooms — laundry rooms, small garages — tend to have a higher per-square-foot cost than large warehouses.

5. Coating System

The number of coats and the type of system significantly affect pricing:

• Single-coat epoxy sealers are the most affordable but least durable

• Two-part epoxy systems (primer + topcoat) are the standard for residential and light commercial

• Multi-coat systems with polyurethane or polyaspartic topcoats are recommended for high-traffic commercial and industrial environments

6. Colour Choices

Standard solid colours are the most affordable. Custom tints or special colour-matching may add a small premium.

7. Decorative Flakes (Chip Broadcast)

Vinyl colour flakes are broadcast into the wet epoxy base coat and sealed with a topcoat. They add texture, hide minor imperfections, and look great in garages and basements. Flake systems typically add $0.50–$1.50/sq ft to the base price.

8. Metallic Epoxy Finishes

Metallic epoxy creates a stunning, three-dimensional effect using metallic pigments that flow and swirl during application. It's the premium choice for showrooms, restaurants, retail spaces, and high-end residential applications. Metallic systems typically cost $8–$14/sq ft or more, depending on complexity.

Epoxy vs. Polyaspartic Flooring Cost in Toronto

Many homeowners and facility managers ask about the difference between epoxy and polyaspartic coatings. Here's a clear comparison:

Feature	Epoxy Flooring	Polyaspartic Flooring
Typical Cost (CAD/sq ft)	$3 – $8	$5 – $12
Durability	High	Very High
UV Resistance	Low (can yellow)	Excellent
Installation Time	2–3 days (cure time)	1 day (fast cure)
Temperature Flexibility	Limited in cold	Works in cold/hot temps
Best For	Garages, basements, warehouses	Garages, commercial floors, fast-turnaround projects

Bottom line: Epoxy is an excellent, proven choice for most applications. Polyaspartic coatings cost more upfront but cure faster, resist UV yellowing better, and can be applied in a wider range of temperatures — making them ideal for busy commercial spaces or projects that need to be completed in a single day.

Many professional installers — including Toroo Coatings — use a hybrid system: an epoxy base coat for thickness and bonding strength, topped with a polyaspartic topcoat for UV resistance and durability. This delivers the best of both worlds.

Why Choose Toroo Coatings?

At Toroo Coatings, we specialize in professional epoxy and polyaspartic flooring installations across Toronto and the Greater Toronto Area. Here's why homeowners, contractors, and facility managers trust us:

• Professional Installation: Our crew is trained and experienced in industry-standard surface preparation and coating application — the foundation of every floor that lasts.

• Residential & Commercial Expertise: From single-car garages to large-format warehouses, sports courts, and restaurant kitchens, we have the equipment and experience to handle projects of all sizes.

• High-Quality Materials: We use commercial-grade epoxy and polyaspartic systems — not the big-box store kits. The difference in adhesion, durability, and finish quality is significant.

• Free Estimates: We offer free, no-obligation quotes for all projects. We assess your floor, discuss your goals, and provide transparent, itemized pricing.

• Serving Toronto & the GTA: We work throughout Toronto, Mississauga, Brampton, Vaughan, Markham, Oakville, and surrounding areas.